Fastener replacement
Backed out fasteners are swapped to close leaks at every screw.
A roofer in Boonton can repair a mobile home roof by resealing open seams, replacing loose fasteners, sealing vents and the AC curb and recoating the roof so it sheds water again. One call to (862) 420-3040 reaches a nearby roofer who works on mobile homes.
Mobile home roofs fail in different places than site-built roofs. The roof might be metal panels, an EPDM or TPO membrane, or asphalt shingles on a pitched roof, depending on the age and model of the home. Most metal roof leaks come from seams opening up, fasteners loosening and caulk drying out around every penetration.
Water does damage quickly in a manufactured home. The thin materials used in many mobile homes stain, swell and grow mold quickly once they get wet. A ceiling sagging with water can be drained through a small hole into a bucket, away from any light fixture, with power to that area shut off at the panel if the panel is safe to reach.
The framing under a mobile home roof is light, so walking it takes care. Stepping between the supports can buckle the metal or damage the ceiling, so roofers stay on the truss lines. Stay off a wet or icy roof, and look for the data plate inside the home, which shows the roof load the home was designed for.
Many mobile home roof repair calls in Boonton also turn up a need for roof coating or metal roof repair.
Need mobile home roof repair in Boonton? Call (862) 420-3040 and describe the problem to a roofer who works in Boonton.
Call nowThe fix depends on the roof type and how far the water has spread.
From a ladder and along the truss lines, the roofer checks seams, screws, coating, edges and penetrations. Inside, ceiling stains help point to where water is getting in.
Backed out fasteners are swapped for new gasketed screws, often a size up so they bite into fresh wood. Rusted spots are cleaned and treated before sealing.
Seams and laps are cleaned, primed where needed and sealed. Membrane roofs get matching patches and seam repairs instead.
Vent caps, skylights and the AC curb get fresh sealant or new flashing, and cracked vent covers are replaced. The edge rail around the roof is resealed too.
Many repairs finish with a roof coating that seals pinholes, protects the metal from rust and keeps the home cooler. Coatings need dry weather and a clean surface to bond.
Backed out fasteners are swapped to close leaks at every screw.
Panel joints are cleaned and resealed so water stops getting through.
A reflective coating covers the roof to seal and protect it.
Vents, skylights and the AC curb are resealed or new flashing where needed.
Water damaged areas are opened and fixed where water sat the longest.
Mobile home roof replacement makes sense when the metal has rusted through in many places, the membrane is worn out or the decking and trusses have rotted from years of leaks. Older metal roofs are often fastened directly over the trusses with insulation below, so replacement can include adding a deck, more insulation and a new membrane or metal roof. Damaged trusses are fixed first.
For mobile home roof replacement in Boonton, the roofer has to plan around light framing and the roof load the home was built for. Ask whether a permit is needed, since manufactured homes can have their own rules. The goal is a roof that sheds water and stays quiet in the wind for years.
Rather than removing the old metal, a roof over adds a new roof system above it. The most common types are a pitched roof over with trusses and shingles or metal, a flat roof over with insulation board and a single ply membrane, and a metal roof over on furring strips. Most roof overs also add insulation, which helps with comfort and with the noise of rain on metal.
Before a roof over on a Boonton mobile home, the added load and the way the new roof ties into the walls have to be worked out. A pitched roof over changes the structure, so it often needs a permit and engineering, plus solid anchoring for wind. A good roof over ends the seam and screw leaks that plague old metal roofs.
Mobile and manufactured homes in Boonton range from older single and double wides with metal roofs to newer homes with pitched shingle roofs. Owners in Boonton and neighboring communities such as Lake Hiawatha, Mountain Lakes, Parsippany and Towaco often find that a well kept coating is the difference between a dry roof and a leaking one, and catching a leak early keeps ceiling panels and framing from rotting.
For mobile home roof repair in Boonton, NJ or nearby towns like Lake Hiawatha, Mountain Lakes, Parsippany and Towaco, call (862) 420-3040 to reach a roofer who covers your street.
Cold winters bring snow, ice and a long stretch of freezing nights. When warm attic air melts the snow, the meltwater runs down and freezes again at the eaves, which is how ice dams form and back water up under the shingles. Strong coastal storms push rain into every weak spot at the flashing and valleys. Most homeowners in Boonton, NJ have the roof checked in the fall and again after the snow melts.
Small roof problems caught early usually stay small repairs.
Local roofers see the same roofs and storm damage across Boonton and nearby towns.
Ask your questions before you agree to anything.
More questions? Call (862) 420-3040
Liquid-applied roof coatings that seal seams, reflect heat and add years to a roof, as an option before a full tear-off.
Learn moreMetal roof repairs that stop leaks at the screws, laps and flashing, without replacing panels that are still sound.
Learn moreEPDM rubber roof repairs done with primer, cover tape and lap sealant made for rubber, after the real leak point is found.
Learn moreLeak repairs that fix the entry point, not just the ceiling stain, before wet decking and insulation turn into rot.
Learn moreLooking for something else?
See all roofing servicesCall (862) 420-3040 to talk to a roofer serving Boonton, NJ.