Starter strip
The edges get drip edge and starter shingles which keeps wind from peeling up the first course.
Shingle Roofing
Shingle Roof Installation Boonton, NJ
A new shingle roof in Boonton is a system of layers, and each one has to go on in the right order for the shingles to do their job, with nailing and flashing done to the shingle instructions. One call to (862) 420-3040 reaches a nearby roofer who installs shingle roofs.
A shingle roof works as a system, not as a single product. Below the shingles go metal drip edge, a self-adhering ice barrier at the eaves and valleys, a layer of underlayment and a starter row at the edges. Flashing at every wall, chimney, valley and pipe, plus intake and exhaust ventilation, finishes the system.
Shingle choice sets the look, the wind rating and the life of the roof. 3-tab shingles are thin and uniform, and architectural shingles are thicker laminated shingles with a textured, shadowed look and higher wind ratings. Impact-resistant shingles rated Class 4 under the UL 2218 test are an option where hail is common, and some insurers treat them differently, so ask yours.
Pitch matters before anything is ordered. Asphalt shingles generally need a slope of at least 2 in 12, and roofs between 2 in 12 and 4 in 12 need extra underlayment. A low porch or shed dormer may need a membrane section joined carefully to the shingles.
Depending on what the roofer finds, shingle roof installation in Boonton, NJ can go hand in hand with shingle roof replacement and roof installation.
Need shingle roof installation in Boonton? Call (862) 420-3040 to reach a nearby roofing contractor.
Call nowThe process
The order of a shingle installation
Here is the order a roofer follows on a new shingle roof.
Start with the deck
The roof deck, usually plywood or OSB, is checked for soft spots, gaps and protruding nails before anything covers it. A wet deck is never covered.
Ice barrier first
Drip edge goes along the eaves, then ice and water shield runs up from the eave edge and down every valley. Where ice dams form, codes call for the barrier to reach beyond the warm wall line.
Lay the underlayment
Underlayment covers the deck in shingled rows, and the rake edges get their drip edge after it. Synthetic underlayment is lighter, stronger and less likely to wrinkle than felt.
Start at the eaves
The starter row seals the bottom edge and rakes of the roof. Skipping it is a common cause of edge blow-offs.
Shingle the field
Each course is nailed in the nailing zone, never high or overdriven, and step flashing goes in piece by piece at every sidewall. Counter flashing laps over the step flashing at chimneys and walls.
Ventilation at the ridge
Exhaust at the ridge is matched to intake at the soffits so air moves through the attic. Too little intake makes a ridge vent pull air the wrong way.
What is included
Layers of a shingle roof system
Ice barrier
Self-adhering membrane is applied at the eaves and in valleys to seal around nails if water backs up.
Flashing details
Step, counter and kickout flashing, pipe boots and a ridge vent are installed new to keep the attic and roof in balance.
Choosing a shingle
The style, color and wind rating are chosen up front and to the weather the roof will face.
Synthetic underlayment
A synthetic water barrier goes over every sheet of decking before any shingle goes down.
Related service
Architectural Shingle Installation Boonton, NJ
Architectural shingle installation follows the same order as any shingle roof, but the shingle has its own rules. The nails must land in the narrow area where the two laminated layers overlap, or the bottom layer can slip and the wind rating is lost. Compatible starter and cap products finish the edges and ridge cleanly.
Most new shingle roofs in Boonton are architectural, and for good reason. They stand up to wind better than 3-tab, hide small dips in the deck and usually last longer. Look at a few colors on a nearby roof in daylight before deciding.
Related service
Asphalt Shingle Roof Installation Boonton, NJ
An asphalt shingle roof installation is the most common way to roof a house, and the details decide how well it performs. The shingles rarely fail first; the edges, nails and flashing do. Ask the roofer to explain the nailing pattern, the underlayment and how walls and valleys will be flashed.
For an asphalt shingle roof installation in Boonton, plan for a few days of work on an average house. Shingles seal best in warm sun, so roofs installed in cold weather are often hand sealed along the edges. Rain delays are normal because the deck has to stay dry.
Local help
Shingle Roof Installation Near Me
New shingle roofs in Boonton go on everything from new houses and additions to reroofs of older homes. From Boonton out to neighboring towns such as Lake Hiawatha, Mountain Lakes, Parsippany and Towaco, houses built decades ago tend to need ventilation and flashing upgrades when they get a new shingle roof, which is why the system under the shingles deserves as much attention as the color. If you are searching for a shingle roof installer near me, ask what goes under the shingles, not just which shingle goes on top.
For shingle roof installation in Boonton, NJ or nearby towns like Lake Hiawatha, Mountain Lakes, Parsippany and Towaco, call (862) 420-3040 to reach a roofer who covers your street.
What the local climate does to a roof
Cold winters bring snow, ice and a long stretch of freezing nights. Heat escaping from the attic melts snow on the upper roof, and the water refreezes at the colder eaves, which is how ice dams form and back water up under the shingles. Strong coastal storms push rain into every weak spot at the flashing and valleys. That is why roof repair in Boonton is busiest after a hard winter and before the next one.
Why call
Why act early
Drier ceilings
Small roof problems caught early usually stay small repairs.
Local knowledge
Roofers in Boonton know the roof types and weather wear common in local homes.
Know what happens next
Ask your questions before you agree to anything.
Shingle Roof Installation questions
How steep does a roof need to be for shingles?
Shingles are made for slopes of 2 in 12 and steeper. Roofs that are low but still within range get added underlayment protection. Flatter sections are roofed with a membrane instead.
How many nails should each shingle have?
Shingles stay on because of correct nailing as much as sealant. Most shingles take four nails, or six in high-wind zones. Nails set too high miss the course below, and overdriven nails cut the mat, which is how shingles blow off a new roof.
What is the best season for a shingle roof installation?
Mild, dry weather is the easiest time to install shingles. In cold weather shingles get stiff and the sealant strips need sun to bond, so roofers handle them carefully and often hand seal the edges. Rain and snow are the real limits, since a wet deck should never be covered.
Which is better, 3-tab or architectural shingles?
3-tab shingles are a single flat layer with cutouts, while architectural shingles are two laminated layers. Architectural shingles generally have higher wind ratings, last longer and have a textured look, which is why most new roofs use them. 3-tab can make sense on outbuildings or when matching an older roof.
What goes under the shingles on a new roof?
Starting at the deck, a new roof gets drip edge, ice and water shield at the eaves and valleys, underlayment over the rest and a starter strip at the edges. Most roofers now use synthetic underlayment instead of felt, since it lies flat and resists tearing. Check that the shingle instructions and local code are both followed.
More questions? Call (862) 420-3040
Other services that may help
Shingle Roof Replacement
Tearing off a worn shingle roof down to the decking and putting on a new one, with soft decking fixed before anything new goes on.
Learn moreRoof Installation
Putting on a new roof the way the material maker intends, with ventilation and flashing planned in from the start.
Learn moreRoof Ventilation
Balancing attic intake and exhaust with soffit vents, ridge vents and attic fans, without mixing vent types that work against each other.
Learn moreGutter Installation
Seamless gutter installation sized to the roof, pitched to the downspouts and hung on hidden hangers, from K-style aluminum to half-round and copper.
Learn more
Looking for something else?
See all roofing servicesNeed shingle roof installation in Boonton, NJ?
Call now for Boonton shingle roof installation and help in the towns around it.